Rega Neo TTPSU

Neo PSU

The Neo PSU is an advanced turntable power supply providing user controllable fine speed adjustment, advanced anti-vibration motor circuit and the convenience of electronic speed change. The Neo will make a welcome addition to any compatible Rega turntable by reducing motor noise, improving speed stability and rotational speed accuracy.

The Neo PSU is compatible with the following Rega turntable models:

P3-24 / RP3 / Planar 3 2016 / RP6 / P5 / P7 / RP40 special edition / RP8 Or any older Rega turntable fitted with our aftermarket 24v Motor Upgrade Kit.

Using the same DSP (digital signal processing) generator found in the RP10 the Neo is built upon a high stability crystal. The Neo features an advanced anti-vibration circuit, fine motor speed adjustment and the convenience of electronic speed change. The DSP generator will divide the accurate signal from the crystal to the exact frequency required to turn the platter at the selected speed whilst producing a near perfect sinusoidal waveform to drive the 24v motor.

Rega Neo TTPSU
Neo PSU

Technical Specifications

Output to motor bi-phase
24 V AC protected by resettable fuse
Power consumption
7.2 W
Voltage
24 V AC
Power supply
Rega PS1 only
Speed control step size
0.01 RPM
PS1 (UK)
Input 230 V ~ 50 Hz 0.07 A / Output 24 V ~ 350 mA AC
PS1 (EU - Euro 2 pin)
Input 230 V ~ 50 Hz 0.07 A / Output 24 V ~ 350 mA AC
PS1 (American)
Input 115-120 V ~ 60 Hz / Output 24 V ~ 350 mA AC
PS1 (Australian)
Input 230 V ~ 50 Hz 0.07 A / Output 24 V ~ 350 mA AC
PS1 (Japan)
Input 100 V ~ 50/60 Hz / Output 24 V ~ 350 mA AC
PS1 (Korea)
Input 220 V ~ 60 Hz 0.07 A / Output 24 V ~ 350 mA AC

Complementary Components

24v Motor Upgrade Kit

  • Individually hand tuned PCB to minimise vibration
  • Rega designed 24v low vibration, low noise synchronous AC motor assembly
  • Rigidly mounted to improve start up speed over previous suspended Planar models
  • Guaranteed to improve drive, speed stability and sonic performance
Rega Planar 3 Turntable

  • RB330 tonearm
  • Elys 2 (optional)
  • 12 mm opti-white polished glass platter
  • Double brace technology
  • 24 V low noise motor
  • Compatible with Neo power supply
  • Clear dust cover

Experience Rega

Contact your nearest Rega dealer or global distributor

Lifetime Warranty

All Rega products carry a lifetime warranty against manufacture defects.

Every product we make is designed and assembled in the UK to the highest possible standard. This warranty covers genuine confirmed manufacture defects. This warranty does not cover wear and tear. Any unauthorised modifications or failure to follow the Rega recommended guidelines may invalidate the warranty.

Please see your user manual for detailed warranty information for your particular product. Your statutory rights are not affected.