Rega 2 mm Three Point Arm Height Spacer - Universal Accessory

2mm Three Point Arm Height Adjustment Spacer - Universal

Some other manufacturers cartridges may have a deeper body than Rega cartridges, these will sometimes require the use of the three-point spacer to allow clearance of the rear of the cartridge from the vinyl.

When Rega arms are fitted to turntables from other manufacturers it may be necessary to add our Rega arm spacers to achieve the correct arm height.

Note: On Rega turntables, spacers should not be necessary unless you are you using an exceptionally deep-bodied cartridge from another manufacturer.

Arm height or V.T.A adjustment can be a controversial subject. Rega believes that the integrity of the arm fixing onto the arm mounting board is much more important than the questionable facility of arm adjustment. The arm should be reasonably parallel to the record surface or slightly lower at the mounting. The only time a spacer is necessary to raise the arm height is if the rear of a cartridge is hitting the record whilst playing.

Rega 2 mm Three Point Arm Height Spacer - Universal Accessory

Experience Rega

Contact your nearest Rega dealer or global distributor

Lifetime Warranty

All Rega products carry a lifetime warranty against manufacture defects.

Every product we make is designed and assembled in the UK to the highest possible standard. This warranty covers genuine confirmed manufacture defects. This warranty does not cover wear and tear. Any unauthorised modifications or failure to follow the Rega recommended guidelines may invalidate the warranty.

Please see your user manual for detailed warranty information for your particular product. Your statutory rights are not affected.